Sequin Revision History

This file lists changes that have been made to the Sequin program. Where appropriate, there are also links to the relevant section of the Sequin help documentation.

Version 12.21--June 20, 2012

• A new function has been added to trim low quality ends from sequences prior to submission. When sequences or alignments are imported into the program, they are now checked for the presence of a significant number of ambiguous bases near the 5' or 3' end. You may be prompted to trim or remove these sequences from your submission.

• A variety of minor bugs have been fixed.

Version 12.10--May 17, 2012

• New Submission Wizards are available for submitting microsatellite and mitochondrial D-loop/control region sequences. The Wizards will prompt the submitter for all necessary information for these types of sequences, including source information and annotation. Detailed instructions for using all of the Wizards are now available.

• A new Vector Trim Tool is available in both the submission dialogs and the Record Viewer. We encourage all submitters to use this tool to screen for vector contamination before submitting. The new tool allows you to trim sequences based on a BLAST analysis of the sequences against NCBI's vector database.

• Feature and qualifier dialogs have been updated to comply with the latest version of the International Nucleotide Sequence Database Collaboration (INSDC) Feature Document. This includes the addition of the /pseudogene qualifier. When indicating that a gene is a pseudogene, the submitter must indicate the type of pseudogene: processed, unprocessed, unitary, allelic or unknown. These types are defined within the INSDC Feature Table Document.

Version 11.90--November 21, 2011

• New Submissions Wizards have been added for submitting Transcriptome Shotgun Assemblies (TSA) and intergenic spacer sequences. The Wizards are modeled after the uncultured sample Wizard released previously. The Wizards will prompt the submitter for the necessary source and annotation information.

• The Sequencing Method Page has been added in the submission dialogs to capture information regarding the sequencing technology and assembly programs used for the sequences in the submission. Note that non-assembled next-generation sequences should be submitted to SRA.

• Submitters now have the ability to delete sequences from either the submission dialogs or the record viewer using the Sequence Deletion Tool.

• Feature and qualifier dialogs have been updated to comply with the latest version of the INSDC Feature Documentation.

Version 11.70--September 13, 2011

• New Submissions Wizards have been added for submitting viral sequences and ribosomal RNA/ITS/IGS sequences from cultured samples. The Wizards are modeled after the uncultured sample Wizard released previously. The Wizards will prompt the submitter for the necessary source and annotation information.

Version 11.00--January 26, 2011

• A new Submission Wizard is available for submitting sequences obtained from uncultured organisms via direct PCR amplification from source or host DNA. The Wizard will prompt the submitter for all necessary information for these types of sequences including source information and annotation. Future Wizards are planned for more directed submission of other types of sequences.

• Feature and qualifier dialogs have been updated to comply with the latest version of the INSDC Feature Documentation.

Version 10.00--April 15, 2010

• Feature and qualifier dialogs have been updated to comply with the latest version of the INSDC Feature Documentation.

• Many functions have been copied to the Annotate Menu in the record viewer to create a more central location for updating information later in the submission process.

Version 9.00--November 24, 2008

• Feature and qualifier dialogs have been updated to comply with the latest version of the INSDC Feature Documentation.

Version 6.50--November 15, 2006

• The command-line program tbl2asn is no longer packaged with the Sequin program. This will allow for more flexibility in updating both functions. Instead, tbl2asn is now available by anonymous ftp.

• The ORF finder function has been updated to allow more options in viewing predicted open reading frames. The prediction algorithm now allows for the selection of alternative start codons based on the genetic code of the source organism.

Version 6.15--March 2, 2006

• Sequin now allows users to run a BLAST search of their nucleotide sequence against NCBI's UniVec database. It is highly recommended that all sequences be checked for vector before submission to the database.

• The dialogs in the Evidence Subpage have been updated to facilitate the inclusion of mandatory information in the use of the Experiment and Inference qualifiers.

Version 6.00--October 27, 2005

• The submission dialogs have been redesigned to facilitate the generation of Sequin files for submission. Various Assistants have been added to aid in the file preparation, including an option to add nucleotide sequences without using a previously formatted FASTA file. Sequin can now import a table of source modifiers for multiple records and contains several dialogs to assist in the preparation of FASTA definition lines. You can now also import a file of protein FASTA sequences for submissions containing multiple records.

• The Update Sequence dialog has been updated to allow more options for handling existing and new feature annotation.

• A new Alignment Assistant was added to allow for the annotation of a set of records using the alignment coordinates rather than annotating each individual record in the set.

Version 5.35--November 9, 2004

• The sequence editor has been redesigned to allow easier editing of nucleotide sequence and viewing of protein translations in all reading frames. You can now view immediately any changes to the resulting protein translation as the nucleotide sequence is being changed. You can also export a segment of the nucleotide sequence with or without any features that are annotated. In addition, you can view the nucleotide sequence segmented into triplet codons based on the annotated protein translation. Details about the new functions can be found in the Sequence Editor section of the help documentation.

• The Update Sequence function now allows for the updating of multiple sequences at one time. A function to update quality scores after changing sequence has also been added. Furthermore, when sequence similarity is insufficient to generate an alignment, Sequin will notify you and provide options for continuing the update.

• The ability to add unique information for one source qualifier for each of the records in a batch or set has been added. This can be done using the Parse File to Source function under the Edit menu in the record viewer, which allows you to import a tab-delimited table.

Version 5.25--June 18, 2004

• The alignment reader has been updated to allow for the designation of non-IUPAC characters used to indicate gaps, ambiguities, and match (identical) characters in alignment submissions. Details about specifying these characters can be found in the Sequin help documentation . If the alignment used for submission is not valid, errors will be reported to the submitter indicating the problem and possible solutions.

• Batch Feature Apply and Batch Feature Edit functions have been added under the Annotate menu. The Batch Feature Apply function allows you to add the same feature across the entire span of each of a set of similar sequences. The Batch Feature Edit function allows you to globaly edit existing features that appear on a set of similar sequences. More details about these options can be found in the Sequin help documentation .

Version 4.50--April 28, 2003

• Sequin has been updated to allow for easier submission of sequences to the Third Party Annotation Database (TPA) . You must indicate during the submission process that the Submission category is Third Party Annotation. An Assembly Tracking pop-up will allow you to input the primary accession number(s) from which the Third Party Annotation sequence is derived.

• The alignment view in the Record Viewer has been updated to display the nucleotide sequences contained within the alignment rather than a graphical view of the alignment. Differences between the sequences can be easily identified by adjusting the target sequence.

Version 4.00--April 26, 2002

• A number of improvements have been made to increase the speed and overall performance of the program.

• The Graphical View has been updated to more accurately display the features presented within the file.

• A variety of minor bugs have been fixed (affecting all platforms).

Version 3.70--May 24, 2001

• The Update Sequence utility has been revised. The new version is based on an alignment indexing function and offers new update possibilities, such as 'patching' a corrected fragment of a sequence to the current sequence. The new function is described in more detail in the Help documentation.

• Feature Propagation has also been revised to use the alignment indexing function. This new tool can be found under the Edit menu of the Record Viewer. Details can be found in the Help documentation.

Version 3.32--July 12, 2000

• Improved validation of PHRAP quality scores

Version 3.30--May 19, 2000

• A bug in the Update Sequence utility has been fixed. This function can align highly related sequences of any length; aligning less similar sequences will cause Sequin to crash. A different algorithm that will allow alignment of less related sequences will be introduced later this year. Update Sequence is described in more detail in the Help documentation.

• Sequin can read in a simple five-column tab-delimited table of feature locations and qualifiers, along with the DNA sequence and submitter information, and prepare a GenBank submission. Even very long chromosomes (e.g., 20 Mb) can be processed in seconds. The entire process can be automated for multiple chromosomes in a genome with the utility tbl2asn, now packaged with the Sequin download. Detailed instructions are now available.

• Improvements in reading sequences in NEXUS format (for submitting nucleotide alignments)

• Better handling of PHRAP quality scores for HTG submissions

• A variety of minor bugs have been fixed (affecting all platforms).

Version 3.25--March 28, 2000

• Improvements in reading sequences in NEXUS format (for submitting nucleotide alignments)

• Better handling of PHRAP quality scores for HTG submissions

• A variety of minor bugs have been fixed (affecting all platforms).

Version 3.17--February 10, 2000

• A variety of minor bugs have been fixed (affecting all platforms).

Version 3.05--November 5, 1999

• A variety of minor bugs have been fixed (affecting all platforms).

Version 3.00--September 19, 1999

• It is now easier to configure Sequin for network access when you are behind a firewall. If you use Sequin in its network aware mode, you can download existing GenBank records into Sequin for easier updating, screen your sequence for vector or mitochondrial contamination, and perform PowerBLAST searches. For additional information, see http://www.ncbi.nlm.nih.gov/Sequin/netaware.html .

• A variety of minor bugs have been fixed (affecting all platforms).

Version 2.90--May 10, 1999

• A variety of minor bugs have been fixed (affecting all platforms).

Version 2.80--January 27, 1999

• Setting up Sequin to communicate over the network is now much easier.
  Sequin can function as either a stand-alone or network-aware program. The stand-alone version is all that is needed to perform most sequence submissions. In its network aware mode, Sequin can also communicate with the NCBI to download sequences from Entrez, perform Power-BLAST searches and Entrez queries, and screen for the presence of vector sequences or repeat elements.
  The Network Configuration program is located under the Misc menu, both on the initial Welcome to Sequin page and in the record viewer. Most users can select a "Normal" connection and click on Accept to begin the configuration. If you are behind a firewall, you may need to contact your system administrator in order to fill in the Proxy and Port fields. Users outside the United States or with a bad Internet connection may need to increase the Timeout, the length of time for which Sequin will wait for a response from the network.

• Asnload files are no longer included in the Sequin distribution
  Due to improvements in NCBI services, Asnload files are no longer necessary on any platform for recent NCBI software. Therefore, when you download and install the new version of Sequin, the Asnload folder will no longer be present.

Version 2.70--September 14, 1998

• This version is capable of editing complete bacterial chromosomes or large eukaryotic chromosomal segments in a single record. The generation of reports (i.e., GenBank and Graphic view) and validation are now much faster.

• Sequin can now annotate features by reading in a tab-delimited table. The table specifies the location and type of feature, and Sequin processes the feature intervals and translates any CDSs. The table is read in the record viewer (after the sequence has been imported) using the File-->Open menu. The table must follow a defined format. The first line starts with >Feature, a space, and then the Sequence ID of the sequence you are annotating. In the example below, eIF4E is the Sequence ID. The table is composed of five columns: start, stop, feature key, qualifier key, and qualifier value. The columns are separated by tabs. The first row has start, stop, and feature key. Additional feature intervals just have start and stop. The qualifiers follow on lines starting with three tabs.

  For example, a table which looks like this:

  >Feature eIF4E
  80	2881	gene
  			gene	eIF4E
  
  201	224	CDS
  1550	1920
  1986	2085
  2317	2404
  2466	2629
  			product	eukaryotic initiation factor 4E-II
  
  1402	1458	CDS
  1550	1920
  1986	2085
  2317	2404
  2466	2629
  			product	eukaryotic initiation factor 4E-I
  			note	encoded by two messenger RNAs
  
  80	224	mRNA
  1550	1920
  1986	2085
  2317	2404
  2466	2881
  			product	eukaryotic initiation factor 4E-II
  
  80	224	mRNA
  892	1458
  1550	1920
  1986	2085
  2317	2404
  2466	2881
  			product	eukaryotic initiation factor 4E-I
  
  80	224	mRNA
  1129	1458
  1550	1920
  1986	2085
  2317	2404
  2466	2881
  			product	eukaryotic initiation factor 4E-I
  
  

  will result in a GenBank flatfile which contains this:

  
       mRNA            join(80..224,1129..1458,1550..1920,1986..2085,2317..2404,
                       2466..2881)
                       /gene="eIF4E"
                       /product="eukaryotic initiation factor 4E-I"
       mRNA            join(80..224,892..1458,1550..1920,1986..2085,2317..2404,
                       2466..2881)
                       /gene="eIF4E"
                       /product="eukaryotic initiation factor 4E-I"
       mRNA            join(80..224,1550..1920,1986..2085,2317..2404,2466..2881)
                       /gene="eIF4E"
                       /product="eukaryotic initiation factor 4E-II"
       gene            80..2881
                       /gene="eIF4E"
       CDS             join(201..224,1550..1920,1986..2085,2317..2404,2466..2629)
                       /gene="eIF4E"
                       /codon_start=1
                       /product="eukaryotic initiation factor 4E-II"
                       /translation="MVVLETEKTSAPSTEQGRPEPPTSAAAPAEAKDVKPKEDPQETG
                       EPAGNTATTTAPAGDDAVRTEHLYKHPLMNVWTLWYLENDRSKSWEDMQNEITSFDTV
                       EDFWSLYNHIKPPSEIKLGSDYSLFKKNIRPMWEDAANKQGGRWVITLNKSSKTDLDN
                       LWLDVLLCLIGEAFDHSDQICGAVINIRGKSNKISIWTADGNNEEAALEIGHKLRDAL
                       RLGRNNSLQYQLHKDTMVKQGSNVKSIYTL"
       CDS             join(1402..1458,1550..1920,1986..2085,2317..2404,
                       2466..2629)
                       /gene="eIF4E"
                       /note="encoded by two messenger RNAs"
                       /codon_start=1
                       /product="eukaryotic initiation factor 4E-I"
                       /translation="MQSDFHRMKNFANPKSMFKTSAPSTEQGRPEPPTSAAAPAEAKD
                       VKPKEDPQETGEPAGNTATTTAPAGDDAVRTEHLYKHPLMNVWTLWYLENDRSKSWED
                       MQNEITSFDTVEDFWSLYNHIKPPSEIKLGSDYSLFKKNIRPMWEDAANKQGGRWVIT
                       LNKSSKTDLDNLWLDVLLCLIGEAFDHSDQICGAVINIRGKSNKISIWTADGNNEEAA
                       LEIGHKLRDALRLGRNNSLQYQLHKDTMVKQGSNVKSIYTL"
  
  
  

  Note that if the gene feature spans the intervals of the CDS and mRNA features for that gene, you don't need to include gene "qualifiers" in those features, since they will be picked up by overlap.

  Features which are on the complementary strand are indicated by reversing the interval locations. For example, the table:

  >Features dna2
  2710	2639	tRNA
  			note	codon recognized: GAA
  			product	tRNA-Glu
  			anticodon	(pos:2675..2677, aa:Glu)
  

  will result in a GenBank flatfile containing:

  
       tRNA            complement(2639..2710)
                       /note="codon recognized: GAA"
                       /product="tRNA-Glu"
                       /anticodon=(pos:2675..2677, aa:Glu)
  
  

Version 2.60--June 2, 1998

• You can now open a FASTA-formatted DNA sequence file in Sequin without first creating a Sequin record. On the Welcome to Sequin Form, click on "Read Existing Record" to read in your sequence and open it in the record viewer. Or, if you are already viewing a record in Sequin, choose File-->Open to open a FASTA-formatted DNA sequence. However, although the sequence will be displayed in Sequin and can be analyzed with tools such as PowerBLAST, Vector Screen, or ORF Finder, it should not be submitted, because it does not have the appropriate annotations or the required contact information to make it a valid submission.

• A variety of minor bugs have been fixed (affecting all platforms).

Version 2.45--March 3, 1998

• Easier sequence annotations
  You can now use the Sequence Editor Feature menu, as well as the main Sequin Annotate menu, to annotate features on the sequence. The features listed are identical, and the instructions for adding them are the same, with one exception. If you annotate them in the Annotate menu, you must provide the nucleotide sequence location of the feature. However, if you add features from the Sequence Editor, you do not need to enter the nucleotide coordinates manually. Simply highlight the sequence which the feature covers, and the location of the sequence will be automatically entered in the feature location box.

• New PowerBLAST features
  PowerBLAST capabilities have been enhanced. When you do a PowerBLAST from within Sequin, you can limit a search either for or against an organism or taxonomic group. Under Organism Filter, click on "Restrict to" to limit your search to a particular organism. Or, conversely, click on "Filter against" to search against all organisms except one. Type the scientific name of the organism (e.g., Homo Sapiens) or taxonomic group (e.g., Mammalia) in the "Name" box. After you do a PowerBLAST search, additional controls will be added to the bottom of the record viewer window. These controls allow you to retrieve the PowerBLAST hits from Entrez, and then look for Entrez neighbors. Use the alignment pop-up to select the type of alignment (search) that was performed. If multiple blast search types were run in one PowerBLAST search, this allows you to get one type at a time. Then click on the Retrieve button to retrieve the records in a document summary window, where you can view Medline, Protein, Nucleotide, Structure, and Genome neighbors of the sequence(s). Click on the Refine button to open a query refinement window in which you can further refine the PowerBLAST hits by selecting other Entrez terms, such as Author name to view sequences belonging to a specific author.

• Replacing or updating your sequence
  We had previously explained that you can now replace or merge the sequence in the record with a new sequence without going into the Sequence Editor. This option is available in the Update Sequence submenu of the main Sequin Edit menu. In addition to being able import a sequence in FASTA format (Read FASTA File), import a sequence record in ASN.1 format (Read Sequence Record), or download a sequence record from Entrez (Download Accession), you can now import a sequence from a Sequin PowerBLAST alignment (Selected Alignment). Note that in all cases, both the target and the imported sequence must be nucleotide sequences. The alignment between your original sequence and the imported sequence can be viewed in a separate window. You can then choose to merge the 5' or 3' end of the imported sequence with the target sequence in the record, or replace the target sequence with the imported sequence. The features on the imported sequence will be automatically copied to the original sequence. You can also choose only to propagate features from the imported sequence record to the target.

• Contact information for future submissions
  The contact, authors, and affiliation information you provide on the Submitting Authors form can now be saved as a block and used for subsequent submissions. For your first Sequin submission, fill in the requested information. Then, in the record viewer, click on "Edit Submitter Info" under the Edit menu, and then on Export Submitter Info under the File menu in the resulting Submission Instructions form. For subsequent Sequin submissions, click on Import Submitter Info on the first page of the Submitting Authors form. You must still fill in the manuscript title on the this page, though.

• Formatting segmented population/phylogenetic sets
  Sequin can now read segmented sets of sequences which are parts of phylogenetic, population, or mutation studies. A segmented set is a collection of non-overlapping sequences which cover a specified genetic region, such as a set of exons along with fragments of flanking introns. The sequences must be in FASTA or FASTA+GAP format. Each segment should have its own sequence identifier (the term immediately following the ">", but organism name and source modifiers should only be indicated for the first segment from each sequence. Square brackets are used to delimit the members of a set. For example:

  
  [ >bioseq1part1 [org=Mus musculus] [strain=BALB/c] 
  CAGATGGCTCC
  >bioseq1part2 ATAATGACAGCTTCATAATGGCAGTGGGTGAGCCCCTGGTGCACATCAG 
  ] 
  [
  >bioseq2part1 [org=Rattus norvegicus] [strain=Sprague-Dawley]
  CAGTCGGCTCC 
  >bioseq2part2
  ATAATGATGTCTTCATAATGGCAGAAAGTGAGCCCCTGGTGCACATCAG 
  ]
  
  

• Creating automatic definition lines
  Sequin can now create definition lines (sequence titles) automatically based on information provided in the record. This option works for single sequences as well as sets of sequences, and can handle complex annotations with multiple features. The definition lines will follow standard GenBank conventions. Use the function "Generate Definition Line" under the Sequin Annotate menu.

• Encoding new information in definition line
  If you are submitting the sequence for an organism which is not present in the NCBI taxonomy database, you can indicate the lineage of the organism on the first line (definition line) of your FASTA-formatted nucleotide sequence. Use the modifier [lineage=lineage] on the line where other modifiers are indicated. For example,

  
  >dna1 [org=Neworganism] [strain=A] [lineage=Newlineage]
  GGGGGGGGGGAAAAAAAAAAAAAAATTTTTTTTTTTTTTTTCCCCCCCCCCCCCGGGGGGGGGGG
  AAAAAAATTTTTTTTTTTTTCCCCCCCCCCCCCC
  
  
  
  For information about the organisms presently in GenBank, see the
  NCBI taxonomy browser at http://www.ncbi.nlm.nih.gov/Taxonomy/
  
  
  Additional source information can also be encoded directly in the
  definition line.  You can now indicate 
  [location={genomic,chloroplast,kinetoplast,mitochondrion,macronuclear,
  extrachromosomal,plasmid,transposon,insertion sequence,cyanelle,proviral, virion}]  and [molecule={dna,rna}] . In
  each case you can pick one item from the list in {}, so a sample
  definition line could be:
  
  >dna1 [org=Homo sapiens] [location=genomic] [molecule=dna]
  
  
  
  
  Direct submission information
  
  
  The DIRECT SUBMISSION reference for your new submission will now
  appear as it will once the record is released to the public.  In
  the past, this information was stored by Sequin, but not
  displayed.  This citation lists the authors who should receive
  scientific credit for the sequence, and may have as many authors as
  you see fit.  It should have, at the very least, one author.
  Author names are initially entered on the Submitting Authors form.
  You can modify the list by double clicking on the reference.
  
  Minor changes
  
  
  Reference publication types now include Proceedings (meetings) and
  Proceedings Chapter (meeting abstracts).
  
  When you highlight a range of sequence in the Sequence Editor, the
  selected sequence is shown as a box in the Graphic view of the
  record.
  
  An option called "Select Target" was added to the Sequin Search
  menu.  This option changes the sequence which is selected in the
  Target Sequence pop-up.
  
  

Version 2.28--September 19, 1997

• You can now replace or merge the sequence in the record with a new sequence without going into the Sequence Editor. In the main Sequin window, choose one of the three items in the Edit-->Update Sequence submenu. You can import a sequence in FASTA format (Read FASTA File), a sequence record in ASN.1 format (Read Sequence Record), or, if you are running Sequin in its Network Aware mode, download a sequence record from Entrez (Download Accession). The alignment between your original sequence and the imported sequence can be viewed in a separate window. You can then choose to merge the 5' or 3' end of the imported sequence with the target sequence in the record, or replace the target sequence with the imported sequence. The features on the imported sequence will be automatically copied to the original sequence. You can also choose only to propagate features from the imported sequence record to the target.

• If you are submitting an aligned set of sequences, and one or more of the sequences is already present in the GenBank/EMBL/DDBJ database, you can mark that sequence(s) so that it does not get a new accession number. Instead of providing the sequence(s) with a new Sequence Identifier, add 'acc' to the existing accession or gi number. For instance, use the identifier accU12345, where U12345 is the existing accession number. The sequence does not need a title since it is not being resubmitted to the database. Thus, an example of a nucleotide definition line would be:

  >accU54469

• You can now encode a a comment in a protein definition line, and the text of the comment will turn into a /note on the CDS feature. For example, if the definition line for the protein sequence is

  >aa1 [gene=eIF4E] [prot=eukaryotic initiation factor 4E-I] [comment=alternative splice product] Drosophila melanogaster eukaryotic initiation factor 4E-I, complete sequence
  

  the corresponding CDS feature will have the following fields:

  /gene="eIF4E"
  /note="alternative splice product"
  /product="eukaryotic initiation factor 4E-I"
  

• PowerBLAST capabilities have been enhanced. From within Sequin, you can perform blastn or tblastn searches of the sequence(s) in the record against many NCBI supported nucleotide databases, and blastp or blastx searches against protein databases. PowerBLAST can now also handle large sequences. For additional information, see the BLAST home page at http://www.ncbi.nlm.nih.gov/BLAST/.
• A variety of minor bugs have been fixed (affecting all platforms).

Version 2.20--July 29, 1997

• In the Sequence Editor, the "Find" command under the Edit menu now searches the displayed nucleotide sequence for amino acid as well as nucleotide sequence patterns. If you type in an amino acid sequence, Sequin will search for that sequence in a three-frame translation of the nucleotide sequence. For example,
  • CDLPEYC finds DNA sequences encoding CDLPEYC
  • [CRQ]DLPEYC finds DNA sequences encoding C or R or Q followed by DLPEYC
  • XDLPEYC finds DNA sequences encoding any amino acid followed by DLPEYC
  • CDL(3)EYC finds DNA sequences encoding CDLEEEYC
  • CDL(1:3)PE finds DNA sequences encoding CDLPE, CDLPPE, and CDLPPPE
  • CDL(1:3)XE finds DNA sequences encoding CDL, followed by 1-3 occurrences of any amino acid, followed by E, i.e., CDLAAE, CDLRSE, or CDLAPQE

• For gene features on a segmented set, the location is now specified by an "order" rather than a "join". In the past, a gene feature on a segmented set was indicated on the last record in the set as follows:

  	gene            join(AF000001:1..2000,1..5388)
  	                /gene="testbar"
  

  In this version of Sequin, the location of the gene feature is shown on the last record as follows:

  	gene            order(AF000001:1..2000,1..5388)
   	                /gene="testbar"
  

• The order in which the gene, CDS, and other features are displayed has been changed. In the past, the order of these features, if they covered the same sequence interval, was random. Now, features with the same interval are always displayed in the following order:

  gene
  CDS
  any_feature
  

  Please note that, as always, the order in which features are displayed depends on their left-most sequence position. Thus, the source feature, whose left-most position is "1", is always the first feature. For example,

  	source		1..4495
  			/organism="Homo sapiens"
  	gene		86..4339
  			/gene="ABC1"
  	CDS		86..4339
  			/gene="ABC1"
  

• Under the Sequin Search menu, the command previously called "Find" has been renamed "Find ASN.1". This command allows you to find and replace strings of text in your submission.
• Under the Sequin Search menu, a new command called "Find FlatFile" has been added. This command allows you to find strings of text in your submission.
• Under the Sequin Annotate menu, an additional choice called "Remaining Features" has been added. Now any feature which is legal under the DDBJ/EMBL/GenBank feature table can be added to a submission.
• The default HUP date is now one year from the current date. The HUP (hold until published date) is the date on which you specify that the sequence can be released to the public.
• In the Sequence Editor, the "Label" option is now available under the View menu. This option allows you to choose how sequence names are displayed in an alignment.
• A number of bugs in the Sequence Editor have been fixed.
• A number of bugs specific to the DEC Alpha OSF1 version of Sequin have been fixed.

Version 2.14--July 5, 1997

• Network Entrez, an NCBI tool for accessing bibliographic, sequence, and structure records is now fully integrated into Sequin. As before, users can download sequences from Entrez to view or to edit and resubmit to the databases. Now, users can also view any type of record on demand from within Sequin. Users are reminded that they can only update their own records this way.
• PowerBLAST, a version of the client for the popular BLAST software for sequence comparisons, is now available from within Sequin. Users can compare their sequence to sequences in the nucleotide and protein databases and view the from results within Sequin.
• A new algorithm is now used to calculate global sequence alignments. You can have Sequin calculate and display the alignment between a sequence in the record and another sequence in a file. In the sequence editor, select the option "Align with" under the Edit menu.
• Sequin will now recognize sequence alignments which have been saved in one of two NEXUS formats, NEXUS Interleaved and NEXUS Contiguous formats.
• Records can now be viewed with two new Display Formats, Summary and Sequence. Summary format shows the range of any sequence alignments in the record. Sequence format shows the sequence(s) in the record along with any associated features.
• The location of certain menu items has been changed. All features and descriptors are now accessed from the Annotate menu.
• A variety of minor bugs have been fixed (affecting all platforms).

Version 1.94--March 12, 1997

• We have increased support for phylogenetic/population study submissions. The supporting documentation has been extended and now includes instructions on how to propagate features (such as CDS or rRNA) through alignments.
• We have added pattern matching for nucleotide sequences using regular expressions. This is used via the "Find" command in the Sequence Editor Edit menu. For example,
  • TCAGGGC finds the sequence TCAGGGC
  • [TCA]CAGGGC finds T or C or A followed by CAGGGC
  • NCAGGGC finds T or C or G or A followed by CAGGGC
  • TCA(3)GC finds the sequence TCAGGGC
  • TCA(1:3)GC finds the sequences TCAGC, TCAGGC, and TCAGGGC
  • TCA(1:3)NC finds the sequence TCA, followed by 1-3 occurrences of G,A,T,or C, followed by C, i.e., TCATC or TCATTC or TCAATGC
• You must now enter the scientific, not the common, organism name when preparing a new submission. Sequin, as well as the GenBank/EMBL/DDBJ record, will still list both scientific and common names, however.
• A variety of minor bugs have been fixed (affecting all platforms).