| This page provides a text alternative
for Volume 3, Number 3, available in full-color
PDF.
Choosing Your Suppliers: Some Helpful Tips From Small Plant Owners
By Larae Booker
The U.S. Department of Agriculture's (USDA) Food Safety and Inspection Service (FSIS) wants you to have the information
you need to comply with regulatory requirements and to produce the safest possible food.
To help the Agency do this, from time to time Small Plant News will bring you tips from small and very small plant owners—just
like you—on topics that matter most to your operation.
For this issue, Small Plant News reached out to Hugh Tyler, owner and operator of the Columbia, South Carolina-based, The Butcher Shop,
with over 40 years in the meat industry, and to Mark Schad, who in his position with Smart Food Safety, Inc., a consulting company,
uses knowledge from 30-plus years in the meat industry, primarily as owner of a small processing operation based in Cincinnati, Ohio,
to advise small and very small plant owners.
Tyler and Schad weighed in on an area they both found of critical importance to you: choosing your suppliers. The following are
four major tips that came out of Small Plant News' conversations with these experienced—and successful—meat industry professionals.
Tip 1: Relationships are key.
Both Schad and Tyler suggest buying only from suppliers with whom you can have a relationship.
Schad, whose processing operation made only one product, was able to form a solid relationship with a single supplier. He recognized
that other operations that produce multiple products may need several suppliers, but the idea is the same: "Nail it down to one
supplier and form a relationship with him or her, or narrow it down to as few suppliers as possible."
While Tyler suggested a slightly different approach of using two to three suppliers to spur competition for pricing, he also
stressed the importance of relationships. And because reputations are invaluable to small and very small processors, you should buy
from those suppliers who work hard to protect their own reputation. His advice is to work with suppliers who have too much to lose if they don't.
Tip 2: When it comes to the quality and safety of the food you produce, the better the materials you have coming in the door,
the better product you'll have going out.
Or as Schad explained, "Aim for minimal defects when you receive the product." Defects can include not only the presence of bone,
blood, and excess fat associated with food quality, but pathogens as well. Catching defects at the door by choosing quality
suppliers saves your operation the time and expense of removing them.
Tyler agreed. "Look for suppliers who are careful about what they themselves buy." Beware of "salvage dealers" who don't
use quality ingredients in their products.
Tip 3: Upfront costs for better suppliers are worth the price.
A simple concept, but a hard sell: you get what you pay for. If you're forging a relationship with quality suppliers and aiming
for minimal defects, it may come at a slightly higher price. Schad advises, "Don't always buy cheaper. Paying more up front can be better in the end."
But, as Tyler added, "losing customers is a much greater cost than, say, 3 cents on the pound for a good supplier with quality product."
Tip 4: Flex your muscles as a buyer.
Work with suppliers who understand that your operation is under Federal inspection and who will help you stay in compliance.
For example, you can inform suppliers up front that if the product doesn't meet your critical limits—like temperature—when
you receive it, you won't accept it. Tyler's establishment uses this practice.
Be confident that you have some buying power, especially if you're building relationships with good suppliers. Be critical about what comes in the
door and even consider paying a little more for it.
Your suppliers have an impact on the quality and safety of the products that come out under your establishment's name. Choose them wisely.
If you have a tip you'd like to share with other owners of small and very small plants, contact Small Plant News at (800) 336-3747 or
email SmallPlantNews@fsis.usda.gov.
[Back to Top]
How the 2008 Farm Bill Affects State and Federal Meat and Poultry Plants
By Elizabeth Boody
The Food, Conservation, and Energy Act of 2008 (also known as the Farm Bill),
which was enacted on June 18, 2008, provides a new program option for certain State-inspected establishments, as well
as new regulatory requirements for federally inspected establishments.
The new law supplements the existing Federal-State cooperative inspection program with a new provision whereby existing State-inspected
plants with 25 or fewer employees can apply to join a new program. Under the direction of USDA, State employees would administer Federal
regulations and label all products with a Federal mark of inspection. Thus, these USDA-selected small and very small State-inspected
establishments would be eligible to ship interstate.
When the interstate program goes into effect, the U.S. Department of Agriculture will reimburse the respective States for "not less than
60 percent" of the inspection costs at those selected establishments. Under the current cooperative agreement, the reimbursement is
up to 50 percent. The Farm Bill also provides "transition grants" for States to help establishments develop food safety plans
in order to transition to this new hybrid program.
On September 16, 2009, FSIS published the proposed rule for interstate shipping. Two public teleconference meetings were held on October 27 and November 5.
State meat and poultry inspection programs that choose not to participate will continue to operate under the current cooperative agreement,
which requires that State meat and poultry inspection programs impose mandatory inspection and sanitation requirements "at least equal to"
those in the Federal Meat Inspection Act and the Poultry Products Inspection Act. However, under that program, State-inspected meat and
poultry products produced are prohibited from being shipped across State lines.
Another provision in the Farm Bill having an impact on small plants is a requirement that all FSIS-inspected meat and poultry establishments
do the following: (1) prepare and maintain recall plans for all meat or poultry products produced and shipped by the establishment; (2) document
each reassessment of the process control plans of the establishment; and (3) "promptly notify USDA FSIS with regard to the type, amount,
origin, and destination of the [meat] or poultry product" if they have "reason to believe, that an adulterated or misbranded [meat or poultry]
product received by or originating from the establishment has entered into commerce."
If you have further questions or need more information on the progress of the Farm Bill implementation, contact FSIS' Congressional and
Public Affairs Office at (202) 720-9113.
[Back to Top]
Adopt a Food Defense Plan Voluntarily
By Marianne Elbertson
FSIS is offering a new, simple and easy-to-use planning tool to small and very small plants that need food defense plans. The agency hopes
to avoid rulemaking that will mandate food defense plans by encouraging all plants to adopt them voluntarily.
If at least 90 percent of the regulated industry maintains functional plans, as evidenced by surveys of FSIS inspection personnel,
FSIS will deem rulemaking unnecessary. In December 2009, FSIS will repeat its Food Defense Plan Survey to determine how many FSIS-regulated
slaughter and processing plants have voluntarily adopted a functional food defense plan. Results from the third survey, conducted in August 2008,
indicated that fewer than 50 percent of these plants had adopted plans.
To assist small and very small plants with voluntarily adopting a plan, FSIS has developed a new general food defense plan (PDF Only).
It was mailed in October 2009 to establishments that did not have a food defense plan documented during the 2008 survey. By reviewing the document
and signing the cover page, plants can answer "Yes" when FSIS inspectors ask whether they have a plan as part of the latest survey.
The plan documents procedures that an establishment likely already has in place. In addition, the plan will provide guidance on how to
maintain a functional plan through periodic reviews and annual testing.
It is important to have a functional food defense plan for several reasons. Adopting and implementing a food defense plan can increase your
preparedness and ability to respond to an emergency in a way that is consistent with current best practices. This, in turn, will help protect
your customers, employees, brand name, and company reputation, and may reduce your exposure to liability. The first page of the FSIS general
food defense plan has more about the importance of food defense plans.
In addition to the mailing, it is available on the FSIS Web site at www.fsis.usda.gov/Science/
Small_Very_Small_Plant_Outreach/index.asp.
If you have policy-related questions about the new plan, contact the FSIS Policy Development Division through askFSIS at
http://askfsis.custhelp.com (any time) or call (800) 233-3935 (6:00 a.m. - 5:00 p.m. CT,
Monday through Friday, except on Federal holidays).
[Back to Top]
Food Safety Resources
By Sally Fernandez
Looking for a resource to assist you in preventing Listeria monocytogenes (Lm) contamination in your plant? The DVD and
companion booklet, "Control of Listeria monocytogenes in Small Meat and Poultry Establishments" may be just what you need.
This pair of resources is designed to provide guidelines for small processors on methods and practices for assessing and controlling
opportunities for contamination of ready-to-eat (RTE) products by Lm. Sanitation steps and testing regimes are clearly
demonstrated and explained in the DVD. The booklet describes primary sources and potential reservoirs of contamination. It provides
considerations for control methods and suggests design improvements for optimal contamination prevention. In addition, the booklet covers
environmental, food-contact surface, and product testing. The appendix contains a checklist of questions designed to help you perform a
risk assessment of Listeria contamination in your plant.
Readers who are interested in this topic may also be interested in the following resources: "Listeria Guidelines for Industry,"
"FSIS Listeria monocytogenes Workshop," and "Implementation of a Post-Packaging Heat Treatment to Reduce
Listeria monocytogenes on Ready-to-Eat Meat Products for Very Small and Small Establishments."
To order these free materials, fax the order form found in the Food Safety Resources brochure to (202) 690-6519, or complete an online
version of the form and send it to
FoodSafetyResources@fsis.usda.gov.
The online form can be found at www.fsis.usda.gov/Science/
HACCP_Resources_Order_Form/index.asp.
For further assistance, call (800) 336-3747.
[Back to Top]
Commonly Asked Questions & Answers
Q. Am I required to document Sanitation Standard Operating Procedure (SSOP) and Hazard
Analysis and Critical Control Point (HACCP) corrective actions on the Noncompliance Record (NR), or do I have to write them on my company record?
A. The requirement in 9 Code of Federal Regulations (CFR) 416.16 and 417.3(c) is that
you document SSOP and HACCP corrective actions. The establishment can document these corrective actions in its
records or on the NR. If the documentation is on the NR, the NR becomes part of your HACCP or SSOP records and
must meet the recordkeeping requirements of those regulations.
Q. If I conduct retail exempt operations in a federally inspected establishment,
am I required to keep these operations separate from federally inspected operations?
A. Yes. 9 CFR 305.2 requires the official establishment to be separate from
the unofficial establishment so that FSIS is able to distinguish between the two operations and the product
from those operations. Operational and product separation has typically been determined by time or space.
In other words, the retail exempt operations would have to be conducted in an area that is completely
separate from the area in which inspected activities are being performed and where there is no possibility
of cross-contamination between the two areas. Alternatively, they could be conducted in the same facilities,
but they would have to be conducted at a time when no inspected activities are occurring. The criteria for
exemption from inspection for retail operations are addressed in 9 CFR 303.1(d).
[Back to Top]
Small Plant NEWS
Editor: Keith Payne
Production: Sally Fernandez, Joan Lindenberger
Design: Gordon Wilson
Contact: Small Plant News, USDA/FSIS, Aerospace Building,
3rd Floor-Room 405, 14th and Independence Ave., SW, Washington,
DC 20250. 1-800-336-3747
E-mail: SmallPlantNews@fsis.usda.gov |
