|
|
Poultry Processing: Questions & Answers
|
The Food Safety and Inspection Service (FSIS) is the public health agency in the U.S. Department of Agriculture responsible
for ensuring that the nation's commercial supply of poultry is safe, wholesome, and correctly labeled.
What is poultry processing?
Poultry processing is the term used by the poultry industry to describe the conversion of live poultry into raw poultry
products fit for human consumption.
[Top of Page]
What is ante-mortem inspection?
Ante-mortem inspection examines the live birds for signs of disease. Live birds that are not healthy are not fit for human
food and are condemned.
[Top of Page]
How do establishments slaughter live birds?
The most common slaughter method is cutting the major blood vessels in the neck followed by blood loss. Most poultry slaughter
establishments render the live bird insensible to pain prior to making the cut. Some religious dietary requirements preclude
rendering the live bird insensible to pain.
[Top of Page]
How do establishments remove feathers?
Feather removal is a two-step process. Establishments first immerse carcasses in hot water to loosen the feathers. Then
they pass the carcasses through machines that physically remove the feathers.
[Top of Page]
What is post-mortem inspection?
Post-mortem inspection examines the carcass for evidence of disease or defects. Diseased carcasses are unfit for human food
and are condemned. If reprocessing can remove a defect and make the carcass fit for human food, the establishment can save the
reprocessed carcass.
[Top of Page]
How does FSIS inspect the carcass?
Inspection program personnel observe the external and internal surfaces of each carcass. They also observe and palpate the
internal organs. Based on their inspection findings, they either condemn the carcass or pass the carcass for human food.
[Top of Page]
What is carcass re-inspection?
Re-inspection examines reprocessed carcasses to ensure the removal of defects. If the establishment fails to remove the defects,
inspection program personnel retain the product and prevent its use as human food.
[Top of Page]
What are sanitation performance standards?
Sanitation performance standards are regulatory requirements designed to prevent insanitary conditions within the poultry
processing facility. Inspection program personnel perform daily inspections to ensure that poultry processing establishments
meet the sanitation performance standards.
[Top of Page]
What are sanitation standard operating procedures?
Sanitation standard operating procedures are regulatory requirements designed to prevent direct contamination of product
during processing. Inspection program personnel perform daily inspections to ensure that poultry processing establishments
effectively implement sanitation standard operating procedures.
[Top of Page]
What is a hazard analysis and HACCP plan?
A hazard analysis and HACCP plan are regulatory requirements designed to identify and control physical, chemical, and biological
food safety hazards. Inspection program personnel perform daily inspections to ensure that poultry processing establishments meet
the hazard analysis and HACCP plan requirements.
[Top of Page]
What is a regulatory control action?
A regulatory control action is retention of product, rejection of equipment or facilities, or refusal to allow processing.
Inspection program personnel take a regulatory control action whenever they determine that the establishment failed to meet
the sanitation performance standards, sanitation standard operating procedure, or hazard analysis and HACCP plan requirements.
[Top of Page]
What physical, chemical, and biological food safety hazards occur in raw poultry products?
Physical and chemical food safety hazards rarely occur in raw poultry products. Pathogenic bacteria are the most significant
biological food safety hazards associated with raw poultry products. Salmonella Enteritidis and Campylobacter jejuni
are pathogenic bacteria associated with human illness. FSIS conducts microbiological sampling programs to monitor raw poultry
products for the presence of pathogenic bacteria.
[Top of Page]
Can poultry processing completely eliminate harmful bacteria?
No. Poultry processing cannot eliminate harmful bacteria. Poultry processing conducted in accordance with regulatory requirements
prevents, to the maximum extent possible, harmful bacteria from occurring on raw poultry products.
[Top of Page]
Can raw poultry become unsafe after purchase?
Yes. Raw poultry is not sterile. Holding raw poultry between 40 °F and 140 °F (4.4 °C and 60 °C) allows
bacteria to grow. Minimizing the time between grocery store and refrigerator and between refrigerator and cooking, will minimize
the risk of bacterial growth.
[Top of Page]
Is rinsing, washing, or soaking raw poultry before cooking necessary?
No. Rinsing, washing, or soaking is not necessary. Proper handling after purchase will minimize the consumer's risk of exposure to
bacteria. Rinsing, washing, or soaking raw poultry does not destroy bacteria, but does increase the risk of contaminating other
foods, utensils, and surfaces. Proper cooking will destroy any bacteria present on raw poultry.
[Top of Page]
Follow the four steps of the Food Safe Families campaign:
- CLEAN. Wash hands and surfaces often.
- SEPARATE. Do not let raw poultry or its juices touch other foods.
- COOK. Cook poultry to the safe minimum internal temperature of 165 °F (73.9 °C) as measured with a food thermometer.
- CHILL. Refrigerate poultry promptly.
[Top of Page]
|
Last Modified:
July 20, 2012 |
|
|
|
|
|
