Jump to main content.


Mercury Releases and Spills

You can prevent potential mercury exposure to you and your environment by:
Cleaning Up Spills
Storing, Transporting and Disposing of Mercury
Hazardous Waste Site Cleanup

Cleaning Up Spills

What Never to Do After a Mercury Spill

Top of page

What to Do if a Mercury Thermometer Breaks

NOTE: these instructions also apply to spills from other sources, if the amount spilled is less than or similar to the amount in a thermometer (see specific information about how to clean up broken fluorescent bulbs)
Items needed to clean up a small mercury spill

1. 4-5 ziplock-type bags
2. trash bags (2 to 6 mils thick)
3. rubber, nitrile or latex gloves
4. paper towels
5. cardboard or squeegee
6. eyedropper
7. duct tape, or shaving cream and small paint brush
8. flashlight
9. powdered sulfur (optional)

Cleanup Instructions

  1. Put on rubber, nitrile or latex gloves.

  2. If there are any broken pieces of glass or sharp objects, pick them up with care. Place all broken objects on a paper towel. Fold the paper towel and place in a zip lock bag. Secure the bag and label it as directed by your local health or fire department.

  3. Locate visible mercury beads. Use a squeegee or cardboard to gather mercury beads. Use slow sweeping motions to keep mercury from becoming uncontrollable. Take a flashlight, hold it at a low angle close to the floor in a darkened room and look for additional glistening beads of mercury that may be sticking to the surface or in small cracked areas of the surface. Note: Mercury can move surprising distances on hard-flat surfaces, so be sure to inspect the entire room when "searching."

  4. Use the eyedropper to collect or draw up the mercury beads. Slowly and carefully squeeze mercury onto a damp paper towel. Place the paper towel in a zip lock bag and secure. Make sure to label the bag as directed by your local health or fire department.

  5. After you remove larger beads, put shaving cream on top of small paint brush and gently "dot" the affected area to pick up smaller hard-to-see beads. Alternatively, use duct tape to collect smaller hard-to-see beads. Place the paint brush or duct tape in a zip lock bag and secure. Make sure to label the bag as directed by your local health or fire department.

  6. OPTIONAL STEP: It is OPTIONAL to use commercially available powdered sulfur to absorb the beads that are too small to see. The sulfur does two things: (1) it makes the mercury easier to see since there may be a color change from yellow to brown and (2) it binds the mercury so that it can be easily removed and suppresses the vapor of any missing mercury. Where to get commercialized sulfur? It may be supplied as mercury vapor absorbent in mercury spill kits, which can be purchased from laboratory, chemical supply and hazardous materials response supply manufacturers.
    Note: Powdered sulfur may stain fabrics a dark color. When using powdered sulfur, do not breathe in the powder as it can be moderately toxic. Additionally, users should read and understand product information before use.

  7. If you choose not to use this option, you may want to request the services of a contractor who has monitoring equipment to screen for mercury vapors. Consult your local environmental or health agency to inquire about contractors in your area. Place all materials used with the cleanup, including gloves, in a trash bag. Place all mercury beads and objects into the trash bag. Secure trash bag and label it as directed by your local health or fire department.

  8. Contact your local health department, municipal waste authority or your local fire department for proper disposal in accordance with local, state and federal laws.

  9. Remember to keep the area well ventilated to the outside (i.e., windows open and fans in exterior windows running) for at least 24 hours after your successful cleanup. Continue to keep pets and children out of cleanup area. If sickness occurs, seek medical attention immediately. View information on health effects related to exposures to vapors from metallic mercury. For additional information on health effects, the Agency for Toxic Substances and Disease Registry (ATSDR) provides a Mercury Fact Sheet Exit EPA Disclaimer that also presents information on health effects related to exposures to vapors from metallic mercury.

Recommendation: If there are young children or pregnant women in the house, seek additional advice from your local or state health or state environmental agency.

Top of page

Spills of More than the Amount in a Thermometer, but Less Than or Similar to Two Tablespoons (One Pound)

Cleanup Instructions

1. Have everyone else leave the area; don't let anyone walk through the mercury on their way out.
2. Open all windows and doors to the outside.
3. Turn down the temperature.
4. Shut all doors to other parts of the house, and leave the area.
Don't vacuum.
5. Call your local or state health or environmental agency.

Top of page

Spills of One Pound or More (i.e., if it Looks like Two Tablespoons or More)

Any time one pound or more of mercury is released to the environment, it is mandatory to call the National Response Center (NRC). The NRC hotline operates 24 hours a day, 7 days a week. Call (800) 424-8802. Note that because mercury is heavy, only two tablespoons of mercury weigh about one pound.

Top of page


Storing, Transporting and Disposing of Mercury

What to Do if You Have Mercury in Your Home

Many people have containers of elemental mercury in their homes left over from science projects or other sources. If you have elemental mercury in your home, you need to exercise extreme caution with it and package it to prevent any leaks or spills. See the next two sections of this page to find how to package, transport and dispose of mercury.

Top of page

Packaging Mercury for Storage and Transportation

Top of page

Recycling and Disposal Options

Many states and local agencies have developed collection/exchange programs for mercury-containing devices such as thermometers, manometers, and thermostats. Some counties and cities also have household hazardous waste collection programs.  For information about these programs, contact your local officials to find out when and where a collection will be held in your area. Earth911 also provides information about local collection programs.Exit EPA Disclaimer For information on recycling compact fluorescent light bulbs (CFLs) and other mercury-containing bulbs, see Recycling and Disposal After a CFL Burns Out.

Resource Conservation and Recovery Act (RCRA) recycling and disposal requirements that apply to business and industry.  Under RCRA, some widely generated hazardous wastes, including mercury-containing wastes like certain spent batteries, thermostats, barometers, manometers, temperature and pressure gauges, certain switches and light bulbs, are designated as "universal wastes".  Businesses and industries that qualify as universal waste handlers must follow specific requirements for storing, transporting and disposing of these wastes. Households are exempt from these regulations. Find more information about universal wastes and the RCRA regulations that apply to them.

Note that some states and local jurisdictions have elected to pass regulations that are more stringent than the federal hazardous waste regulations. Several states and municipalities do not recognize the exemption for households; others regulate all fluorescent bulbs as hazardous, regardless of their mercury content. For example, Vermont bans all mercury-containing waste from landfills, including mercury-containing waste generated by households. For more information specific to your state, visit Earth911.com Exit EPA   Disclaimer to contact your local waste collection agency, which can tell you if such requirement exists in your state or locality.

Top of page


Hazardous Waste Site Cleanup

Cleaning Up Superfund and Other Hazardous Waste Sites Where Mercury is Present

At site cleanups of active facilities or abandoned hazardous waste sites, mercury presents significant environmental challenges because it is difficult to treat, exists in many different forms, is volatile, and can be difficult to analyze. Some mercury contamination sites are also contaminated with oils, radioactive materials and organic compounds that present technical challenges.

Cleaning up mercury contamination at active facilities or at abandoned hazardous waste sites and preparing the land for redevelopment or redeployment happens in a variety of EPA programs. EPA is improving the coordination, speed, and effectiveness of cleanups at the nation's contaminated sites through the One Cleanup Program. This Program is EPA's vision for how different cleanup programs at all levels of government can work together to meet that goal — and ensure that resources, activities, and results are effectively coordinated and communicated to the public. EPA accomplishes this work in partnership with state, local and tribal governments and responsible parties. View more information about the various cleanup programs managed by EPA:

EPA Cleanup and Redevelopment Programs

Top of page

Mercury Response Guidebook (for Emergency Responders)

The Mercury Response Guidebook, by EPA’s Emergency Response Team and EPA's Region 5 office in Chicago, is designed to assist emergency and remedial professionals coordinate and clean up indoor mercury spills. The principles in this guidebook can also be used at other mercury-contaminated sites.

You will need the free Adobe Reader to view some of the files on this page. See EPA's PDF page to learn more.
Contents:
Attachments:

Top of page


Local Navigation


Jump to main content.