|
|
|
|
|
|
|
|
|
|
Manufacturer
|
Aquarium Pharmaceuticals, Inc. |
50E Hamilton Street |
Chalfont |
PA |
18914 |
215-822-8181 |
215-822-1906 |
800-847-0659 |
2011-04-27 |
Products by this manufacturer |
|
|
|
|
The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
|
|
|
Health Effects
|
|
From MSDS EMERGENCY OVERVIEW RISKHarmful to aquatic organisms.POTENTIAL HEALTH EFFECTSACUTE HEALTH EFFECTSSWALLOWEDThe material has NOT been classified by EC Directives or other classification systems as ***harmful by ingestion***. This is because of the lack of corroborating animal or human evidence. The material may still be damaging to the health of the individual, following ingestion, especially where pre existing organ (e.g.. liver, kidney) damage is evident. Present definitions of harmful or toxic substances are generally based on doses producing mortality rather than those producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern.EYEAlthough the liquid is not thought to be an irritant (as classified by EC Directives), direct contact with the eye may produce transient discomfort characterized by tearing or conjunctival redness (as with windburn).SKINThe material is not thought to produce adverse health effects or skin irritation following contact (as classified by EC Directives using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting.INHALEDThe material is not thought to produce adverse health effects or irritation of the respiratory tract (as classified by EC Directives using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable control measures be used in an occupational setting. |
From MSDS Long-term exposure to the product is not thought to produce chronic effects adverse to the health (as classified by EC Directives using animal models); nevertheless exposure by all routes should be minimized as a matter of course. |
From MSDS No information provided. |
From MSDS SWALLOWED - Immediately give a glass of water. - First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor. EYE If this product comes in contact with eyes: - Wash out immediately with water. - If irritation continues, seek medical attention. - Removal of contact lenses after an eye injury should only be undertaken by skilled personnel. SKIN If skin or hair contact occurs: - Flush skin and hair with running water (and soap if available). - Seek medical attention in event of irritation. INHALED - If fumes or combustion products are inhaled remove from contaminated area. - Other measures are usually unnecessary. NOTES TO PHYSICIAN Treat symptomatically. |
N |
N |
N |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
2007-12-11 |
2005-12-13 |
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS PROCEDURE FOR HANDLING- Limit all unnecessary personal contact.- Wear protective clothing when risk of exposure occurs.- Use in a well-ventilated area.- Avoid contact with incompatible materials.- When handling, DO NOT eat, drink or smoke.- Keep containers securely sealed when not in use.- Avoid physical damage to containers.- Always wash hands with soap and water after handling.- Work clothes should be laundered separately.- Use good occupational work practice.- Observe manufacturer's storing and handling recommendations.- Atmosphere should be regularly checked against established exposure standards to ensure safe working conditions are maintained.RECOMMENDED STORAGE METHODS- Polyethylene or polypropylene container.- Packing as recommended by manufacturer- Check all containers are clearly labeled and free from leaks.STORAGE REQUIREMENTS- Store in original containers.- Keep containers securely sealed.- Store in a cool, dry, well-ventilated area. |
From MSDS Disposal InstructionsAll waste must be handled in accordance with local, state and federalregulations.- Recycle wherever possible.- Consult manufacturer for recycling options or consult local or regional waste management authority for disposal i |
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|