|
|
|
|
|
|
|
|
|
|
Product Information
|
AFM Safecoat Hard Seal 3101 Clear |
emulsion |
Home maintenance » sealant » Wood
Home maintenance » tile » Sealant
Home maintenance » sealant » Tile
Home maintenance » wood » Sealant
|
800-239-0321 |
2006-03-16 |
Products with similar usage in this database |
|
|
|
|
|
|
|
Manufacturer
|
American Formulating & Manufacturing (AFM) |
3251, 3rd. Avenue |
San Diego |
CA |
92103 |
619-239-0321 |
619-239-0565 |
800-239-0321 |
2012-06-20 |
Products by this manufacturer |
|
|
|
|
The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
|
|
|
|
Health Effects
|
|
From MSDS: Refer to 'Handling'
From Description:
HEALTH PRECAUTIONS: As with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.
|
From MSDS
Symptoms of Overexposure
Symptoms and Effects of Short Term Exposure: Acute. Primary route of entry:
Swallowing: May cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Inhalation: Inhalation-spray mists may cause mild respiratory irritation.
Eye Contact: Liquid splashed into the eye may cause transient eye irritation.
Skin Absorption: None known.
Medical Conditions Generally Aggravated by Exposure: None known.
|
From MSDS
Symptoms and Effects of Repeated Overexposure: Chronic - None known.
|
From MSDS
Suspected Cancer Agents: Federal OSHA: No NTP: NO IARC: No None known.
|
From MSDS
Inhalation: Remove from exposure. Provide plenty of fresh air.
Splash (eyes): Flush immediately with large amounts of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Take to a physician for medical treatment.
Splash (skin): Remove with soap and water. Remove contaminated clothing. Supply copious amounts of fresh water to the skin areas to rinse material away.
Ingestion (Swallowing): Consult with physician, hospital emergency room, or poison control center immediately. Only if conscious, give 2 glasses of water to drink.
Notes to Physician: Any treatment that might be required for overexposure should be directed at the control of symptoms and the clinical conditions.
|
1 |
0 |
0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
2003-01-15 |
|
|
|
|
|
|
|
Handling/Disposal
|
From MSDS
Storage Temperature: Min. 45degF - Max. 120degF/Indoor and outdoor = OK
This product should be stored at room temperature to prolong shelf life. Keep containers in a cool, dry place. Avoid subjecting this product to extreme temperature variations and freezing. Adverse conditions can cause emulsion coagulation.
KEEP CONTAINER CLOSED. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. DO NOT GET IN EYES. IF PRODUCT IS SPRAYED, PREVENT PROLONGED OR REPEATED BREATHING OF SPRAY MIST. USE ADEQUATE VENTILATION WHEN USING THIS PRODUCT. USE GOOD HYGIENE PRACTICES AND WASH AFTER USING PRODUCT.
|
From MSDS
Place contaminated material in suitable sealed metal containers for disposal. Do not incinerate closed containers. Use non leaking containers, seal tightly and label properly. Do not pour contaminated paint back into unused paint. Do not thro
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|